Correlation between damage distribution and ambient noise H/V spectral ratio: the SESAME project results     

Nikolaos Theodoulidis  Giovanna Cultrera  Valerio De Rubeis  Fabrizio Cara  Areti Panou  Marco Pagani  Paula Teves-Costa 《Bulletin of Earthquake Engineering》2008,6(1):109-140

In the framework of the SESAME project one of the tasks was the compilation of all available ambient noise measurements within urban environments affected by historical or/and recent strong earthquakes in Europe. The aim of such a task was to give an answer to the question; “How does horizontal-to-vertical ambient noise spectral ratio compare with damage in modern cities?”. For this purpose five European urban areas, namely, Angra do Heroismo (Portugal), Fabriano and Palermo (Italy), Thessaloniki and Kalamata (Greece) were selected for which spatial damage information was available either in terms of modified Mercalli intensity or in EMS98 damage grades. The geological setting of the examined sites as well as the causative earthquakes are satisfactorily known. Ambient noise recordings compiled for all examined sites have been homogeneously processed by a technique developed and agreed upon SESAME project. Using a standard multivariate statistical analysis, namely, factor analysis and canonical correlation, the horizontal-to-vertical ambient noise spectral ratio (HVNSR) is correlated with damage pattern observed within examined urban areas. Results show that, in some cases (Thessaloniki, Palermo), the HVNSR seems to be able to differentiate between areas previously shown to be associated with higher damage. In other cases however (Angra do Heroismo, Fabriano, Kalamata), the correlation is not statistically significant indicating thus the complex character of the parameters involved, implying that currently there is no a straightforward way that a value of HVNSR can correctly predict the extent to which a given region will be associated with increased damage.  相似文献   

Influence of instruments on the H/V spectral ratios of ambient vibrations   总被引：3，自引：3，他引：0  

Bertrand Guillier  Kuvvet Atakan  Jean-Luc Chatelain  Jens Havskov  Matthias Ohrnberger  Fabrizio Cara  Anne-Marie Duval  Stratos Zacharopoulos  Paula Teves-Costa  The SESAME Team 《Bulletin of Earthquake Engineering》2008,6(1):3-31

For an optimal analysis of the H/V curve, it appears necessary to check the instrument signal to noise ratio in the studied frequency band, to ensure that the signal from the ground noise is well above the internal noise. We assess the reliability and accuracy of various digitizers, sensors and/or digitizer-sensor couples. Although this study is of general interest for any kind of seismological study, we emphasize the influence of equipment on H/V analysis results. To display the impact of the instrumental part on the H/V behavior, some series of tests have been carried out following a step-by-step procedure: first, the digitizers have been tested in the lab (sensitivity, internal noise...), then the three components sensors, still in the lab, and finally the usual user digitizers-sensors couple in lab and outdoors. In general, the digitizer characteristics, verified during this test, correspond well to the manufacturer specifications, however, depending on the digitizer, the quality of the digitized waveform can be very good to very poor, with variation from a channel to another channel (gain, time difference etc.). It appears very clearly that digitizers need a warming up time before the recording to avoid problems in the low-frequency range. Regarding the sensors, we recommend strongly to avoid the use of “classical” accelerometers (i.e., usual force balance technology). The majority of tested seismometers (broadband and short period, even 4.5 Hz) can be used without problems from 0.4 to 25 Hz. In all cases, the instrumentation should be checked first to verify that it works well for the defined study aim, but also to define its limit of use (frequency, sensitivity...).  相似文献   

Hercynian subduction-related processes within the metamorphic continental crust in Calabria (southern Italy)     

Fabrizio Tursi  Richard Spiess  Vincenzo Festa  Rosa Anna Fregola 《Journal of Metamorphic Geology》2020,38(7):771-793

Linking the deformation history of mylonitized continental rocks to the progress of devolatilization reactions that trigger reaction softening is critical for the understanding of crustal scale processes. We have analysed the field geometries and microstructures of deformed rocks within the southern Hercynian belt in Calabria, as well as modelled the pressure–temperature–deformation (P–T–d) trajectory of a main ductile shear zone that tectonically coupled the deeper crustal Mammola Paragneiss Unit with the upper crustal Stilo–Pazzano Phyllite Unit. P–T modelling of the mylonitic Mammola Paragneiss Unit was performed through calculation of phase equilibrium diagrams with the software thermocalc in the MnNCKFMASHTO model system. The prograde P–T–d trajectory is based on the zoning profiles of garnet porphyroblasts and their mineral inclusions, primarily barroisite and epidote. P–T modelling shows that peak metamorphic conditions of ~0.9 GPa and 585°C were reached during a D_n-1 under-thrusting event. The following exhumation during the D_n mylonitic event, and contact metamorphism during D_n+1 and D_n+2 folding events, have also been modelled because they are essential to restore the previous tectono-metamorphic history. The exhumation trajectory was modelled down to 0.3 GPa with temperatures of 440–460°C, under fluid-deficient conditions, as well as the final late Carboniferous contact metamorphism up to T_max of 680–720°C. The prograde path shows clear evidence for thermal buffering during garnet growth at the expense of chlorite, with a heating-dominated stage after chlorite breakdown. Subsequently, a rheological change associated with epidote breakdown (i.e. reaction softening) occurred, highlighted by a net steepening of the P/T trajectory towards the pressure peak. On the basis of the barroisite inclusions within garnet porphyroblasts as well as the ‘hairpin’ shape of the reconstructed P–T–d path (before contact metamorphism), we infer that the unusual low T/P gradient for the Hercynian crust exposed in the Mammola Paragneiss Unit records its involvement in the Palaeotethys–Gondwana subduction beneath Laurussia during D_n-1 under-thrusting. We present a new palaeotectonic interpretation along the southern Hercynian belt in Calabria during the Upper Mississippian–Lower Pennsylvanian, that is consistent with previous geochronology studies.  相似文献   

Late Oligocene-early Miocene sedimentary evolution of the foreland basins in the Sicilian mobile belt: the example of the Peloritani area     

Fabrizio Nigro 《地学学报》1996,8(6):611-625

In the northeastern corner of Sicily (Peloritani Mountains) thin bodies of hercynian crystalline basement, covered by Meso-Cenozoic veneers of sedimentary rocks, represent the highest and innermost Africa-vergent group of thrust units of the Sicilian Belt. The Peloritani tectonic edifice consists of a set of prevalently middle- to high-grade crystalline rocks (so-called Fondachelli Unit, Mandanici Unit and Aspromonte Unit) and thrusts over a thin tectonic wedge made of prevalently Mesozoic to Tertiary sedimentary covers overlying pre-Triassic low-grade metamorphic rocks (Longi-Taormina Unit). The tectonic bodies of the Peloritani thrust system are overlain by thick clastic sequences of late Oligoceneearly Miocene age (the so-called Stilo-Capo d'Orlando Formation). Previous work has pointed out the 'molassic' character of these clastic sequences, which postdate the main deformation phase of the Peloritani belt, started during Oligocene time. New structural data on the crystalline and sedimentary terrains, sedimentological analysis of the outcropping Oligo-Miocene foreland clastic deposits and their geometric relationships with the substrate, make it possible to recognize the syn-tectonic character and the timing of deformation of these basin-fill deposits, which are expressed by prograding clastic fans in the active margin of a foreland-foredeep system. This system has progressively been involved in the accretion of the Sicilian Belt and migration during the early Miocene towards the more external areas represented by the Sicilide sector. Seen in this light, three different lithological units have been distinguished to prdvide a framework for a review of the palaeotectonic significance of the overall Oligo-Miocene terrigenous covers of the Peloritani Thrust belt  相似文献   

Sources of M_w 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence     

Pierfrancesco Burrato  Maria Eliana Poli  Paola Vannoli  Adriano Zanferrari  Roberto Basili  Fabrizio Galadini 《Tectonophysics》2008,453(1-4):157

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.  相似文献   

Chromium solubility in anhydrous Phase B     

Luca Bindi  Ekaterina A. Sirotkina  Andrey V. Bobrov  Fabrizio Nestola  Tetsuo Irifune 《Physics and Chemistry of Minerals》2016,43(2):103-110

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.  相似文献   

Photoluminescence properties of S<Subscript>2</Subscript> molecule trapped in Melanophlogite     

Fabrizio Messina  Michela Todaro  Gianpiero Buscarino  Lavinia Vaccaro  Marco Cannas  Franco M. Gelardi 《Physics and Chemistry of Minerals》2016,43(3):171-179

We studied the photoluminescence properties of a sample of SiO₂-clathrate Melanophlogite, a crystalline microporous material which is found in nature as a rare mineral. Upon β irradiation, the material displays an intense light emission under near-UV illumination. We studied in detail this optical activity by steady-state and time-resolved photoluminescence measurements as a function of temperature. The spectroscopic properties we find can be ascribed to a population of quasi-free molecules trapped within each of the two different types of cage available in the structure of this clathrate, although the spectroscopic properties of the guest molecules are affected by their interactions with the host matrix. Based on the available data, we attribute the observed photoluminescence to trapped S₂ molecules, emitting from their excited ³Σ _u ^? or ³Π _u electronic states, depending on the cage they are trapped in and on temperature. Our results have an impact on the fundamental understanding of host–guest interactions characteristic of microporous systems such as clathrates. Indeed, the data highlight that even a relatively weak coupling between quasi-free S₂ molecules and the two types of cages provided by the Melanophlogite host has a surprisingly complex influence on the optical properties of the guest.  相似文献   

Very hot,very shallow hydrothermal dolomitization: An example from the Maritime Alps (north‐west Italy–south‐east France)          下载免费PDF全文

Luca Barale  Carlo Bertok  Namam Salih Talabani  Anna d'Atri  Luca Martire  Fabrizio Piana  Alain Préat 《Sedimentology》2016,63(7):2037-2065

In the Maritime Alps (north‐west Italy – south‐east France), the Middle Triassic–lowermost Cretaceous platform carbonates of the Provençal Domain locally show an intense dolomitization. Dolomitized bodies, irregularly shaped and variable in size from some metres to hundreds of metres, are associated with tabular bodies of dolomite‐cemented breccias, cutting the bedding at a high angle, and networks of dolomite veins. Field and petrographic observations indicate that dolomitization was a polyphase process, in which episodes of hydrofracturing and host‐rock dissolution, related to episodic expulsion of overpressured fluids through faults and fracture systems, were associated with phases of host‐rock dolomitization and void cementation. Fluid inclusion analysis indicates that dolomitizing fluids were relatively hot (170 to 260°C). The case study represents an outstanding example of a fossil hydrothermal system, which significantly contributes to the knowledge of such dolomitization systems in continental margin settings. The unusually favourable stratigraphic framework allows precise constraint of the timing of dolomitization (earliest Cretaceous) and, consequently, direct evaluation of the burial setting of dolomitization which, for the upper part of the dolomitized succession, was very shallow or even close to the surface. The described large‐scale hydrothermal system was probably related to deep‐rooted faults, and provides indirect evidence of a significant earliest Cretaceous fault activity in this part of the Alpine Tethys European palaeomargin.  相似文献   

Diel microbial variations at a coastal Northern Adriatic station affected by Po River outflows     

Mauro Celussi  Alessandro Paoli  Fabrizio Bernardi Aubry  Mauro Bastianini  Paola Del Negro 《Estuarine, Coastal and Shelf Science》2008

Diel sampling was performed during an early spring survey in the Northern Adriatic Sea at a coastal station off the Po River delta. Samples were taken every 6 h at spring tide maxima and minima in the sub-superficial layer, at the maximum fluorescence depth (∼3 m). Variations in microbial community structure and its processes were assessed by considering heterotrophic bacteria, picocyanobacteria, viruses, exoenzymatic activities, microphytoplankton, nanoplankton and bacterial/cyanobacterial Denaturing Gradient Gel Electrophoresis (DGGE) profiles. A considerable diatom bloom, mostly supported by Skeletonema marinoi was detected. All microbial parameters except viruses, showed a sinusoidal trend with a 12 h period; only picocyanobacteria expressed relative maxima during high tide, showing a phase in opposition to the other parameters. No substantial changes in DGGE band patterns were detected. Even though the results showed bacterial activities to be influenced by the phytoplankton bloom, all microbial parameters' diel trends (except viruses) preferentially followed the tidal fluctuation rather than the light:dark cycle.  相似文献   

Upper Pleistocene tectonics in western Sardinia (Italy): Insights from the Sinis peninsula structural high     

Fabrizio Cocco  Stefano Andreucci  Daniele Sechi  Giulia Cossu  Antonio Funedda 《地学学报》2019,31(5):485-493

The Corsica‐Sardinia block is a lithospheric fragment whose recent role in the geodynamics of the central‐Western Mediterranean basin is still enigmatic. The most recent regional structure in Sardinia is the Plio‐Pleistocene Campidano Basin, which is considered in a ‘post‐rift’ stage since the Middle Pleistocene. New structural and stratigraphic geological surveys along with luminescence ages provide evidence to support an ongoing tectonic activity since the Marine Isotopic Stage 7 (MIS7; ca. 220 ka) on the Sinis peninsula, the structural high that bounds the north‐western side of the Campidano Basin. In particular, this paper reveals for the first time the presence of N–S striking normal faults system offsetting late Pleistocene aeolianites (130 ± 12 ka; 82 ± 9 ka).  相似文献